Q:I hear wheel knocks and my car shakes could there be something wrong with my suspension?
A:Yes, your car's suspension system is an intricate network of cooperating (usually, anyway) components designed to give you a smooth, even, stable ride. Since the suspension is ground zero when it comes to road abuse, the parts wear out, and even break. If your car doesn't seem to ride like it used to, you may have a problem down below.
Suspension Service Video
Posted February 3, 2010 2:50 PM
When you hear the word 'suspension', you may think back to those energetic days of grade school. Well, your car’s suspension is actually a good thing because it keeps your car up off the road and helps provide a comfy ride. It needs to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your car, it’s basically everything that connects your wheels to the car’s frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service.
Here are some warning signs that your suspension may have problems:
the car pulls to one side;
it wanders;
the steering is erratic;
you see uneven tire wear;
you experience a poor ride or handling;
you see oil leaking from shocks
. . . you get the picture. You just don’t feel in control when you’re driving.
Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor can oversee an inspection and tell you what problems you may have.
If you’re in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Tucson or even a large rock can mess things up. With a minor accident it’s tempting to just get an alignment or wheel balance to correct the problem. But if there’s some damage, a simple alignment won’t actually fix the problem, and you’ll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems should be fixed immediately because they can lead to unsafe handling.
One big cause of suspension damage is potholes – those nasty magnets that seem to draw our tires right into them. Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can’t miss, slow down before you hit it. Driving at a slower speed will limit the damage, and may keep your drink from spilling. But don’t brake directly over the pothole. That will cause the car’s weight to shift forward and add to the potential damage.
So don’t put off an inspection of your suspension. We promise the principal won’t be involved.
BRAKEmax Car Car Centers Give us a call today at 520-318-4000. Or stop by at 2910 N Swan Rd Suite #110, Tucson, Arizona 85712
Steering and Suspension
The steering and suspension system of a car are not only important for safety reasons but also enhances the comfort level of the vehicle. The two systems are directly related to each other, which is why they are always referred to together. There are two basic types, standard mechanical steering and rack & pinion steering. The standard mechanical steering can be either power assisted or non-power. Rack & pinion is almost always power assisted although there are rare cases where it is not. The inner tie rod ends are attached to either end of the center link and provides pivot points for the steering gear. From there it goes to the outer tie rod ends through an adjustment sleeve. This sleeve joins the inner and outer tie rod ends together and allows for adjustment when the front wheels are aligned. The outer tie rod ends are connected to the steering knuckle that actually turns the front wheels. The steering knuckle has an upper and lower ball joint that it pivots on and creates the geometry of the steering axis.
